Inground uplight Kios 1 round dia. 220mm.
and Kios 2 square 220mm..

IP67 / EN 60598 / CLASS I / F/CE / IK10

A top range of small shallow inground uplight. Round or square front surface ring stainless steel for outdoor uplight effects. Main application designed for residential areas, shopping areas, squares, parks, sculptures and pedestrian areas.

To ensure efficient drainage, gravel must be used to a depth of 450mm. beneath the housing, and should also be placed around luminaire. Die-cast aluminium housing with high corrosion resistance. Stainless steel fasteners in 316 grade. Cable entry PG13.5 for cable outside diameter minimum 6mm. and maximum 12mm. Durable silicone rubber gasket and clear or frosted toughened glass 15mm. thickness 2.5 tonnes pressure load is transferred by the housing to the foundation. Vehicles with pneumatic tyres can drive over the luminaire but the speed must not exceed 50 km/h. The distance between the floodlight and the illuminated surface should be at least 0.5m. Powder paint with high corrosion resistance with chemical chromatised protection. Recessing box in high density polyethylene is included.

A top range of small shallow inground uplight. Round or square front recess ring stainless steel for outdoor uplight effects. Main application designed for residential areas, shopping areas, squares, parks, sculptures and pedestrian areas. Main characteristics for LED are colour brightness and no maintenance concept. In addition 'touchable glass' solutions are now required for space that are used by people. The luminaires are high quality LEDs source with low energy consumption and long service life 60,000 – 80,000 Hrs.

To ensure efficient drainage, gravel must be used to a depth of 450mm. beneath the housing, and should also be placed around luminaire. Die-cast aluminium housing with high corrosion resistance. Stainless steel fasteners in 316 grade. Cable entry PG13.5 for cable outside diameter minimum 6mm. and maximum 12mm. Durable silicone rubber gasket and clear or frosted toughened glass 15mm. thickness 2.5 tonnes pressure load is transferred by the housing to the foundation. Vehicles with pneumatic tyres can drive over the luminaire but the speed must not exceed 50 km/h. The distance between the floodlight and the illuminated surface should be at least 0.5m. Powder paint with high corrosion resistance with chemical chromatised protection. Recessing box in high density polyethylene is included.

There are two types of LED lamp source. One is high power LED and the other one is SMD (LEDs) both types are available colour with red, blue, yellow, green and white 3300 – 3800 K with integral driver 100 – 240vac.