Harrier inground uplight round dia 275mm.

A top range inground uplight. Round or square front ring stainless steel for outdoor uplight effects. Main application designed for residential areas, shopping areas, squares, parks, sculptures, flag poles, palm trees and pedestrian areas.

To Ensure efficient drainage, gravel must be used to a depth of 450mm. beneath the housing, and should also be placed around luminaire. Body and frame constructed in 304 grade stainless steel. Stainless steel fasteners in 316 grade. Cable entry PG13.5 cable gland supplied with 1m. of exterior 3x1.5 sqmm cable or PG16 for remote control gear Durable silicone rubber gasket and clear toughened glass 12mm. thickness. 2.5 tonnes pressure load is transferred by the housing to the foundation. Vehicles with pneumatic tyres can drive over the luminaire but the speed must not exceed 50 km/h. The distance between the floodlight and the illuminated surface should be at least 0.5m. Recessing box
in high density polyethylene is not included.

The optional touchable glass system provides significant reduction in glass surface temperature. Refer product code ordering for temperature ratings with and without touchable glass system.

A top range inground uplight. Round or square front ring stainless steel for outdoor uplight effects. Main application designed for gardens, residential areas, shopping areas, square, parks, sculptures, flag poles, palm trees and pedestrian areas. Main characteristics are colour brightness and no maintenance concept. In addition 'touchable glass' solutions are now required for space that are used by people. The luminaires are high quality LEDs source with low energy consumption and long service life 60,000 – 80,000 Hrs.

Luminaire is class I for Power LED remote driver 100-240vac. in separate IP67 box inside recessing box. To ensure efficient drainage, gravel must be used to a depth of 450mm. and width of 300mm. beneath the housing and should also be placed around luminaire. Body and frame constructed in 304 grade stainless steel. Stainless steel fasteners in 316 grade. Cable entry PG16 cable gland supplied with 1m. of exterior 3x1.5 sqmm cable. Durable silicone rubber gasket and clear toughened glass 12mm. thickness. 2.5 tonnes pressure load is transferred by the housing to the foundation. Vehicles with pneumatic tyres can drive over the luminaire but speed must not exceed 50 km/h. The distance
between the floodlight and the illuminated surface should be at least 0.5m. Recessing box in high density polyethylene is not included.

The high power LED with three different beam available colour with red, blue, yellow, green and white 3300 – 3800 K